Copper
No.1 HMS
No.1 HMS shall consist of clean iron & steel with a minimum thickness of 1/4", and a maximum size of 60"x24", material handling compatible to feed a furnace charge box.
This grade may include ISRI code 200.
================
No.1 HMS (2 foot)
No.1 HMS (2 foot) shall consist of clean iron & steel with a minimum thickness of 1/4", and a maximum size of 24"x18", material handling compatible to feed a furnace charge box.
This grade may include ISRI code 201.
=====================
No.2 HMS
No.2 Steel shall consist of clean iron & steel with a minimum thickness of 1/8", and a maximum size of 60"x18", material handling compatible to feed a furnace charge box.
=============
No.2 HMS (2 foot)
No.2 Steel (2 foot) shall consist of clean iron & steel with a minimum thickness of 1/8", and a maximum size of 24"x18", material handling compatible to feed a furnace charge box.
================
No.3 Steel (Unprepared Bushling)
No.3 Steel (Unprepared Bushling) shall consist of clean, uncoated steel clippings, stappings & sheet skeletons under 1/8" thick.
===============
No.4 Steel (Silicon Bushling)
No.4 Steel (Silicon Bushling) shall consist of clean silicon bearing steel scrap with a maximum thickness of 1/8"
===============
No.4 Shredded Steel
No.4 Shredded Steel shall consist of course shredded steel scrap
===========
No.1 Heavy Scrap Copper
No.1 Heavy Scrap Copper Shall consist of clean unalloyed copper solids and must be uncoated.
May include copper clippings, punchings, bus bars, commutator segments clean copper pipe or tubing and Copper wire over 1/16" thick but free of burnt or brittle wire.
This grade is equivalent to the ISRI code CANDY
===========
No.2 Scrap Copper
Clean unalloyed copper solids. May include clean, oxidized or coated (plated) copper clippings, punchings, bus bars, commutator segments, clean oxidized copper pipe or tubing free of excessive solder and light gauge clean, oxidized or coated (plated) copper wire but free of fine gauge hair wire. Should be free of excessive oxidation, scale, ash or brittle burnt wire.
========
No.1 Bare Bright Copper Wire
No.1 Bare Bright Copper Wire shall consist of bare, uncoated, unalloyed copper wire, not smaller than 16 gauge (B&S)
Similar to ISRI code BARLEY with the exception that no green wire is allowed.
==========
No.1 Copper Wire
No.1 Copper Wire shall consist of clean, uncoated, unalloyed copper wire, not smaller than 16 gauge (B&S)
Equivalent to ISRI code Berry
============
No.2 Copper Wire
No.2 Copper Wire shall consist of clean unalloyed copper wire, free of hair wire, brittle burnt wire and excessive oils/minimum copper content of 94% remelt recovery rate.
Equivalent to ISRI code Birch
==========
No.1 Copper Wire Nodules
No.1 Copper Wire Nodules shall consist of No 1 bare, uncoated, unalloyed copper wire nodules, from a chopping or shredding operation, not smaller than 16 gauge (B&S) /minimum copper content of 99% remelt recovery rate.
Equivalent to ISRI code CLOVE
======
No.2 Copper Wire Nodules
No.2 Copper Wire Nodules shall consist of No 2 unalloyed copper wire nodules, from a chopping or shredding operation./minimum copper content of 97% remelt recovery rate.
Equivalent to ISRI code COBRA
========
No.1 Insulated Copper Wire
No.1 Insulated Copper Wire shall consist of plastic insulated unalloyed, uncoated (plated) copper wire, with the copper wire not smaller than 16 gauge (B&S).
=======
No.2 Insulated Copper Wire
No.2 Insulated Copper Wire shall consist of assorted plastic insulated, unalloyed copper wire, free of heavy or double insulation.
Included in ISRI code DRUID
==========
No.3 Insulated Copper Wire
No.3 Insulated Copper Wire shall consist of assorted plastic insulated, unalloyed copper wire, includes heavy or double insulation, plastic insulated telephone cable.
Included in ISRI code DRUID
=============
+++++++++++++++++++++++++++++++++++++

Aluminum

Old Mixed Aluminum
Assorted clean aluminum scrap
ISRI code TABOR is included in this grade.
=======
Aluminum Extrusions
Aluminum Extrusions shall consist of clean aluminum extrusions including window & door frames
Must be free of iron inserts, screws and plastic, rubber or other foreign materials.
===========
Cast Aluminum
Cast Aluminum shall consist of clean aluminum castings.
Equivalent to ISRI code TENSE.
=========
Shredded UBC
Shredded UBC shall consist of aluminum Used Beverage Cans that have been magnetically separated and shredded into uniform material handleable (pneumatic) state.
the shredded UBC shall have a minimum density of 12 LBS. (pounds) per cubic foot and a maximum weight density of 17 LBS. per cubic foot.
Must be fee of excessive fine material under 4 mesh in size.
must be free of other metals and foreign material.
Equivalent to ISRI code TALCRED.
==========
+++++++++++++++++++++
Scrap Stainless Steel

Mixed Non Magnetic Stainless Steel Scrap
Assorted Non-Magnetic stainless steel solids. May Contain common 18-8 alloy or 300 series alloys including ASIS types 302, 303, 304, 305, 308, 316, 321, 347, 17-7PH, PH15-7MO
Nickel content will range from 7 to 13% and Chrome will range from 17 to 19%.
===========
309 Stainless Steel Scrap
309 Stainless Steel Scrap shall consist of sorted AISI type 309 stainless steel solids. (also referred to as 25-12 alloy)
=============
310 Stainless Steel Scrap
310 Stainless Steel Scrap shall consist of sorted AISI type 310 stainless steel solids. (also refereed to as 25-20 alloy)
==========
316 Stainless Steel Scrap
316 Stainless Steel Scrap shall consist of sorted AISI type 316 stainless steel solids and shall have a chemical composition of 0.08% Carbon, 16-18% Chromium, 2-3% Molybdenum, 2% Manganese, 10-14% Nickel, 0.045 Phosphorous 0.030% Sulfur, 1.0% Silicon and the balance Iron.
==========
321 Stainless Steel Scrap
321Stainless Steel Scrap shall consist of sorted AISI type 321 stainless steel solids and shall have a chemical composition of 0.08% Carbon, 17-19% Chromium, 2% Manganese, 9-12% Nickel, 0.045 Phosphorous 0.030% Sulfur, 1.0% Silicon Titanium (5 x the amount of carbon) and the balance Iron.
===========
330 Stainless Steel Scrap
330 Stainless Steel Scrap shall consist of sorted AISI type 330 stainless steel solids. (also refereed to as 35-15 alloy)
=-==============